Arvada, Colorado

Garbage Disposal Repair in Arvada, CO

A family company next door in Superior finds why your Arvada disposal hums, leaks or stays dead, and quotes it first.

Schedule Service (720) 285-3573

What's your disposal doing?

Garbage Disposal Repair in Arvada, Colorado

Firm Quote FirstApproved by you before any work
90-Day WarrantyParts & labor
Open 24/7Same-day service often available
Local & Family-OwnedBased in Superior

Garbage Disposal Repair • Arvada

Why a Failing Disposal Is Worth Fixing Right

A garbage disposal is a small, hard-working motor that spins a plate inside a steel chamber, grinding scraps fine enough to wash down the drain. It sits behind a cabinet door, so nobody thinks about it until a flat hum replaces the usual whir or a damp towel shows up under the sink. In Arvada homes, condos and rentals, most disposal trouble comes down to a jam, a worn seal, a tripped overload or a clog just past the unit, and each has a different remedy.

PointLine is a small, family-owned business at 2600 S Rock Creek Pkwy #103 in Superior, which means a call to us gets you a neighbor from just up the road instead of a distant dispatch desk. Your technician begins by asking what you've noticed, then checks the motor, the power supply and every wet connection, and wraps up by explaining the fault in everyday language. You get a firm quote before any work begins, and if a part is needed, that quote covers genuine OEM parts. Many disposal repairs are quick and sensible, and when a cracked housing means replacement is the honest answer, we tell you that too.

Right Now

Humming, Jammed or Dripping Right Now

Before you consider causes or repairs, take these general steps to make the sink safe.

1Shut It Down at the SourceA motor that hums without turning overheats fast, so flip the wall switch off as soon as you hear it. Next, turn off the disposal's breaker or unplug it if you plan to look underneath, because a wall switch alone doesn't guarantee the unit won't start up.
2Tongs, Never FingersEven when the power is off, the grind chamber has hard edges, and a jam can shift suddenly. If you can see an object, use tongs or pliers to lift it out, and keep your hand out of the opening entirely.
3Shut the Valves and Catch the DripsIf you can reach the supply valves under the sink, shut them, place a bucket or shallow pan under the leak and lay towels across the cabinet floor. Don't run the dishwasher for now, because it may drain through the disposal and send more water into the problem.
4Skip the Chemical Drain CleanerPouring a harsh drain product into a sink full of water can harm seals and leave caustic liquid sitting right where someone will have to work. Leave the clog alone and let your technician clear it with the right tools.

Common Problems

Six Disposal Symptoms and Their Usual Causes

These patterns reflect how disposals are generally built; your technician tests your unit first, before naming a fault or quoting a price.

Motor hums but nothing turns
Likely causes
In most cases, something hard like a fruit pit, bone or bottle cap has gotten lodged between the spinning plate and the grind ring. The motor strains against the jam instead of turning.
What we check
We shut off power, turn the plate by hand from the bottom hex socket and look for damage to the plate, bearings or motor.
Typical fix
Freeing the jam and resetting the overload will often get the unit running again, whereas a seized or burned-out motor usually means replacement.
Complete silence at the switch
Likely causes
It could be that the thermal overload has tripped, or that a breaker, GFCI outlet, wall switch or air switch has gone bad. A worn cord or internal connection can also cut power.
What we check
We check the reset button, the breaker, the outlet and the switch, then test whether power actually reaches the motor.
Typical fix
Resetting the overload or replacing a bad switch or outlet is a simple fix, and a dead motor with good power means a new unit.
Water in the sink cabinet
Likely causes
Common causes are dried putty or a worn gasket at the sink flange, a loose clamp on the dishwasher inlet, a failed gasket on the discharge tube, or a cracked housing.
What we check
We dry everything, run water with the dishwasher off and on, and watch each connection to find where the first bead forms.
Typical fix
Flange, clamp and gasket leaks are usually repaired in place, while a cracked housing generally means the disposal is replaced.
Sink draining slowly or backing up
Likely causes
Food waste may be packed into the trap or into the drain line beyond the disposal, often because of grease, starchy scraps or stringy peels. The disposal itself may also be partly jammed.
What we check
We compare both sides of the sink, check the discharge connection and clear the section of line we can reach.
Typical fix
Clearing the blockage at the disposal or trap restores flow, and a clog farther down the line is a plumber's job that we will tell you about plainly.
Grinding, clanking or rattling
Likely causes
A coin, screw or other hard object might be rattling around inside the chamber, or the mounting assembly may have come loose and let the unit shake.
What we check
We remove the object with tools, inspect the shredder plate and impellers, and check the mounting ring and sink flange.
Typical fix
Pulling the object and tightening or reseating the mount often ends the noise, but worn bearings or a damaged plate may call for replacement.
Sour smell rising from the drain
Likely causes
As time goes on, a film of food collects under the splash guard, inside the grind chamber and along the drain, and grease holds the rotting scraps in place. A dishwasher hose that is routed poorly can also allow dirty water to slip back.
What we check
We lift and clean the splash guard, inspect the chamber and check how the dishwasher drain line is routed.
Typical fix
A thorough cleaning and a corrected hose usually clear the odor, and a unit that stays foul after cleaning may have a worn seal or leaking housing.

What Not to Put Down the Disposal

Using a Disposal Day to Day

Most disposal trouble starts with what goes down the drain and how it goes down, so a few simple habits can make a real difference. Think of these as general guidance, and look in your model's manual for the details.

Run Cold, Feed Slowly
Get a strong flow of cold water running before you turn the disposal on, feed in scraps a little at a time, and let the tap run briefly after the grinding smooths out. Cold water keeps fats solid enough to break up and travel down the pipe rather than smearing along the walls. Pushing in a whole plate of scraps at once is the quickest way to bog down the motor and clog the line.
What Belongs in the Trash Instead
Grease and cooking oil coat the drain and harden as they cool, and stringy peels such as celery, corn husks and onion skins can wrap around the moving parts. Bones, coffee grounds and any real quantity of pasta or rice also pack into the trap and slow the drain. Your manual lists what the manufacturer allows, and when in doubt, the trash can is the safer bin.
The Dishwasher Shares This Drain
Since many dishwashers drain through a side inlet on the disposal, a clogged disposal can leave dirty water standing in the dishwasher tub. If the dishwasher drains poorly while the disposal seems fine, the knockout plug left in place during installation or a pinched hose may be the cause. A hose that sags below the inlet can send water backward, and re-routing it in a straighter line may be all that's needed.
The Reset Button, the Hex Key and Knowing When to Stop
Most units have a small red reset button on the bottom and a hex socket at the center that takes an Allen wrench to free a jam, and a homeowner can use either one as long as the power is off. Rock the wrench back and forth until the plate turns freely, then press reset after the motor has cooled. A drip at the flange, a hose clamp or a gasket is usually a simple repair, but water seeping from the housing itself generally means replacing the unit makes more sense, and that is when to give us a call.

Recognize the Problem?

Book Garbage Disposal Repair in Arvada

Tell us what's happening — we'll call you back to confirm a time.

(720) 285-3573

Arvada Homes

What Arvada's Homes and Setting Mean for a Disposal

Arvada's housing history, its two creeks and its high, dry location each leave a general mark on how a disposal wears over time.

Mid-Century Kitchens, Newer Disposals
Arvada expanded quickly as a Denver suburb after World War II, and many of its neighborhoods were built somewhere between the 1950s and the 1970s. In houses that age, the kitchen drain lines behind the wall may be far older than the disposal under the sink. Older pipe tends to be narrower and rougher inside, so grease and starchy scraps settle more easily, and a slow drain is sometimes the line, not the unit.
Olde Town and Older Plumbing
Olde Town Arvada is the city's historic center, and the homes and buildings nearby have often been refreshed one room at a time. A modern disposal bolted to an older sink flange and drain connection can leak at the joints long before the motor wears out. Putty and gaskets that have been in place for years dry out, and a drip at the flange is one of the more routine disposal repairs.
High, Dry Air Along the Front Range
Sitting at about 5,300 to 5,500 feet, Arvada has dry Front Range air, especially through heating season, which can harden rubber splash guards and wear out the gaskets around the sink flange and discharge tube. Rentals and condos add another wrinkle, because a disposal there may pass from household to household with nobody remembering what it was fed. A unit that has been running for years in either setting is worth testing before it is written off.

Before You Call

Simple Checks a Homeowner Can Safely Try

1Give it time to cool, then press the red reset buttonThe thermal overload shuts off power when the motor overheats, so giving it time to cool before you press the button on the bottom may get it running again.
2Check the switch, the breaker and the GFCI outletA tripped breaker or outlet can make a healthy disposal look dead, and resetting one takes seconds and needs no tools.
3Once the power is off, use an Allen wrench to turn the hex socket on the bottomRocking the wrench back and forth frees the plate from the outside, so no one has to reach into the chamber.
4Trace the dishwasher's drain line with your eyesA hose that is pinched behind the cabinet or sagging below the inlet can send water back where it shouldn't go, and straightening it out may be all it takes.
5Wipe clean the underside of the rubber splash guardWith the power off, lifting and cleaning those flaps will often get rid of a sour smell that seems to come from deep in the drain.

What to Expect

From Your Front Door to a Freely Draining Sink

Your technician begins by listening to what you've noticed, clears out and protects the sink cabinet, checks the electrical supply and turns the motor by hand, then runs water through every connection. Before any part is touched, you receive a plain explanation of what failed along with a firm quote.

Diagnostic visit: $85Credited toward the repair if you go ahead
Your price: Firm quoteApproved by you before any work
Warranty: 90 daysParts and labor
Parts: Genuine OEMMatched to your model number

We accept

Cash, Major credit cards, Venmo, Apple Pay, Checks

Book in Arvada (720) 285-3573

Google Reviews

What Our Customers Say

5.0Every review on Google is five stars.

PointLine Care Club

One service call is $85. For $99 a year, every service call is free.

Free service calls all year — no $85 fee
1 free maintenance visit a year
10% off labor on every repair

$99/ year

Join the Care Club What's included

One household · renews yearly · cancel anytime before renewal

Property manager or landlord? See our Property Care Club →

Service Area

Arvada ZIP Codes We Serve

Garbage Disposal Repair at homes, condos and rentals in every part of Arvada.

80002
80003
80004
80005
80007
80033

Including Olde Town Arvada.

Nearby

All appliance repair in Arvada Garbage Disposal Repair across Denver Metro

FAQ

Your Disposal, Our Neighbors: Common Questions

Garbage Disposal questions from Arvada homeowners.

Still have a question?

Give us a call — we'll be glad to help.

(720) 285-3573

Do you cover all of Arvada, including 80033 and the Adams County side?

Yes, we serve Arvada ZIP codes 80002, 80003, 80004, 80005 and 80007, along with the portion of 80033 that is shared with neighboring cities. Arvada sits mostly in Jefferson County with a small part in Adams County, and we work on both sides. If you're not sure your address is covered, send us the street and we'll let you know.

My kitchen is in a 1960s house near Olde Town. Is an older disposal worth repairing?

Often yes, as long as the housing is sound and the repair is a jam, a switch, a seal or a gasket. Older homes may have old drain lines behind a newer unit, so we test the disposal and check whether the slow drain is really beyond it. If the housing is cracked or the motor is seized, we will say plainly that replacement is the better value.

Does Arvada's dry, high-elevation setting affect a disposal?

It can, in small ways. Dry air through the heating season can stiffen rubber splash guards and age the putty and gaskets around the sink flange, which is where many drips start. The motor itself is not troubled by elevation, so most disposal faults here come back to use, age and seals.

I rent my place and the disposal quit. Who should book the repair?

Start with your landlord or property manager, since they usually decide who pays for work on a fixture in the home. Once they approve, either of you can book with us and we will work around your access window. Tell us at booking that the unit is a rental so we can plan around the keys and the approval.

My disposal is jammed, yet the rest of the sink still drains. Can it wait?

It can wait a short while if you leave the switch off, because a humming motor heats quickly and should not be run. With the power off, try the reset button and the hex key, and if the plate won't turn freely, give us a call. A jam that sits can corrode the plate or strain the motor, so a quick visit is the safer choice.

Can you work on a premium, insulated or batch-feed disposal in a remodeled kitchen?

Yes, we repair continuous-feed and batch-feed units, including the quieter insulated models found in newer kitchens. Batch-feed units have a stopper that doubles as the switch, so a stopper that no longer engages is a common reason one will not start. Let us know the brand and model if you have it, and we'll bring the right parts.

Other Repairs We Handle in Arvada

Is your sink backed up with the motor humming?

Book online or call or text (720) 285-3573, and a technician from our Superior office will find the fault and quote it before any work begins.

Schedule Service (720) 285-3573

Garbage Disposal Repair in Arvada, CO

Why a Failing Disposal Is Worth Fixing Right

Humming, Jammed or Dripping Right Now

Six Disposal Symptoms and Their Usual Causes

Motor hums but nothing turns

Complete silence at the switch

Water in the sink cabinet

Sink draining slowly or backing up

Grinding, clanking or rattling

Sour smell rising from the drain

Using a Disposal Day to Day

Run Cold, Feed Slowly

What Belongs in the Trash Instead

The Dishwasher Shares This Drain

The Reset Button, the Hex Key and Knowing When to Stop