Skip to content
PointLineAPPLIANCE REPAIR
Amana logo

Local • Family-Owned

Amana Appliance Repair in Denver Metro Area

Thoughtful service for your Amana refrigerator, freezer, washer, dryer, dishwasher, range and microwave.

5.0 — every review on Google is five stars
Amana appliance repair in Denver Metro Area

Amana Repair

Practical Repair for Hardworking Amana Appliances

Amana appliances tend to be simple, sturdy and easy to live with, which is why they are so common in first homes, rentals and busy family kitchens. When one stops working, the fix is usually straightforward, and getting it running again is often the sensible choice. PointLine is a small, family-owned company based in Superior, and we treat an Amana repair with the same care as any other job.

Your technician starts with a $85 diagnostic visit, and that fee is credited toward the repair if you decide to go ahead. You get a plain explanation of what failed and a firm quote before any work starts. We install genuine OEM parts, back the repair with a 90-day parts and labor warranty, and same-day service is often available depending on the schedule.

Amana Appliances

Amana Appliances Your Technician Can Fix

These are the Amana appliances we repair in homes across the Denver Metro Area and Boulder County.

  • Amana Refrigerator Repair

    Amana refrigerators commonly run warm because of frosted evaporator coils, a weak fan motor, a failed defrost part or dusty condenser coils. We also repair ice makers, water valves, door seals and temperature controls.

    Refrigerator Repair
  • Amana Freezer Repair

    Amana freezers often develop frost buildup, warm spots or constant running, usually tied to a worn door gasket, a defrost problem or an airflow issue. We repair the sealing, defrost and control parts that keep food frozen solid.

    Freezer Repair
  • Amana Washer Repair

    Amana washers commonly have trouble draining, spinning or filling, and a worn lid switch, clogged pump or tired drive part is often behind it. We repair top-load and front-load models, including pumps, valves, switches and suspension parts.

    Washer Repair
  • Amana Dryer Repair

    Amana dryers often run but stay cool or take too long, which commonly points to a restricted vent, a failed heating element or igniter, or a blown thermal fuse. We also handle squeaks, thumps, worn belts, rollers and moisture sensors.

    Dryer Repair
  • Amana Dishwasher Repair

    Amana dishwashers commonly leave standing water, skip the fill or leave dishes gritty, often from a clogged filter, drain pump or inlet valve. We repair pumps, valves, float switches, door latches and control parts.

    Dishwasher Repair
  • Amana Range & Stove Repair

    Amana ranges and stoves often have a bake element that quits, a gas igniter that glows weakly or a surface burner that will not light. We repair electric and gas models, including igniters, elements, sensors and controls, with gas setup checked for altitude.

    Range & Stove Repair
  • Amana Microwave Repair

    Amana microwaves commonly run without heating, spark inside or stop responding at the touchpad. We repair door switches, turntable motors, controls and other internal parts, with careful safety steps around the high-voltage section.

    Microwave Repair

Common Problems

Everyday Amana Breakdowns and What Causes Them

Most Amana trouble falls into a handful of familiar patterns, and each one has a short list of likely causes your technician works through in order.

  • Dryer runs but clothes stay damp

    Likely causes
    Lint-packed vent, failed heating element or gas igniter, blown thermal fuse; codes like F4E3 often signal restricted airflow
    What we check
    Vent airflow, element or igniter, fuses, thermostats and the moisture sensor
  • Washer will not drain or spin

    Likely causes
    Clogged drain pump, kinked hose, faulty lid switch or worn drive parts
    What we check
    Pump and hose, lid switch, drive belt or coupling, and control signals
  • Refrigerator section is warm

    Likely causes
    Frosted evaporator, failed defrost heater or thermostat, weak fan, dirty condenser coils
    What we check
    Coil frost, defrost circuit, fan motors, coils and the control board
  • Dishwasher leaves water in the tub

    Likely causes
    Blocked filter or drain path, failing drain pump; F9E1 and F9E2 commonly point here
    What we check
    Filter, drain hose, air gap or disposal connection, and the pump itself
  • Oven will not heat or bakes unevenly

    Likely causes
    Burned-out bake element, weak gas igniter, faulty temperature sensor
    What we check
    Elements, igniter current draw, sensor readings and the gas setup at altitude
  • Ice maker stops making ice

    Likely causes
    Frozen fill tube, failed water valve, scale buildup or a worn ice maker module
    What we check
    Water supply and valve, fill tube, freezer temperature and the ice maker

Error Codes

Amana Dishwasher & Dryer Error Codes

We repair every Amana appliance listed above. Amana publishes official error codes only for its dishwasher and dryer — they're below. For other Amana appliances we diagnose by symptoms, so just call and describe what's happening.

Amana Dishwasher Error Codes

Amana dishwasher error codes
CodeWhat it means
F9E1Try it yourselfLong drain — the dishwasher isn't draining.Clean the filter, check the drain hose for kinks or clogs, clear the disposer (and remove its knockout plug on a new install) and the air gap.
F9E2Call a proDrain motor error.Check the disposer and drain for clogs and straighten the drain hose. Cycle power; if it returns, call for service.
F8E4Call a proWater in the base (the float switch tripped) — often a leak or excessive suds.Turn off the water supply. Check connections and the drip tray, avoid dish soap. If the dishwasher was professionally installed, call for service.
F8E5Call a proFill valve stuck open.Turn off the water to the dishwasher, press Cancel once and keep the door closed — then call for service.
F8E2Call a proFill valve electrical error.Check the inlet valve connection for leaks, cycle power; if it returns, call for service.
H2OTry it yourselfNot detecting water.Make sure the water supply is on and the supply hose isn't kinked, then press Start.
F6E3Try it yourselfExcessive suds.Scoop out the suds, add 2–3 tablespoons of vegetable oil and run a cycle with no detergent, then a cycle with detergent and no dishes.
F6E4Try it yourselfWater float switch.Level the dishwasher and cycle power.
F4E2, F4E3Call a proHeating system error.Disconnect power for 30 seconds. If the code returns, call for service.
F7E2Call a proWash motor error.Cycle power; if the code returns, call for service.
FAE4 / F10E4, FAE5 / F10E5Call a proDiverter valve error (E4) or diverter leak (E5).Check for leaks under the dishwasher, cycle power or press Cancel twice. If it returns, call for service.
F1E1, F1E2, F2E1, F2E2, F3E2, F6E1Call a proControl, keypad, communication or sensor (thermistor/OWI) errors.Disconnect power for 30 seconds. If the code returns, call for service.

Source: Amana Product Help — dishwasher error codes (one article per code). Codes vary by model — check your owner's manual.

Amana Dryer Error Codes

Amana dryer error codes
CodeWhat it means
F4E3Try it yourselfRestricted airflow — the lint screen or vent is clogged, or the vent is crushed, kinked or has too many turns.Clean the lint screen, check the vent run and outside hood. If it persists, have the whole vent cleaned.
F4E4Try it yourselfLow or no line voltage — the heater can't turn on.Check both breakers (electric dryers need 240 V on a separate 30-amp circuit) and the power cord; call an electrician if needed.
F4E1Call a proHeater system — the heater or heater relays.Turn off the breaker for 1 minute, restart on Timed Dry. If it returns, call for service.
F3E2, F3E5Try it yourselfMoisture sensor — five loads in a row dried without sensor data.Level the dryer and dry fuller loads on an Automatic cycle. Power cycle if it continues.
F3E1, F3E3Call a proExhaust or inlet thermistor.Power cycle for 1 minute and run a Timed Dry cycle. If it returns, call for service.
F7E1Call a proMotor system — motor, control or wiring.Power cycle for 1 minute. If it returns, call for service.
F1E1, F1E3, F1E4, F1E5, F2E1, F2E2, F6E1Call a proControl unit, keypad or communication error.Power cycle at the breaker and run a Timed Dry cycle. If the code comes back, call for service.

Source: Amana Product Help — dryer error codes (one article per code). Codes vary by model — check your owner's manual.

Before You Call

How to Find Your Amana Model Number

Having the model and serial number handy helps us bring the right parts, and on Amana appliances the tag is usually in one of these spots.

  • Refrigerator

    Usually on a label inside the fresh food section, along a side wall or near the top, sometimes behind the crisper drawers

  • Washer

    Usually under the lid or on the back of the console on top-load models, and around the door opening on front-load models

  • Dryer

    Usually on a sticker inside the door opening, on the frame or the edge of the door itself

  • Dishwasher

    Usually on the side edge of the inner door or along the tub frame, visible when the door is open

  • Range

    Usually on the frame behind the storage drawer or around the oven door opening when the door is open

Care Tips

Amana Upkeep Tips for Colorado Homes

  • Clean the dryer vent, not just the screen

    Dry Colorado air makes lint fly, and a clogged vent is a common reason dryers overheat or show a restricted airflow code. Clear the lint screen every load and have the full vent run cleaned regularly.

  • Stay ahead of mineral scale

    Denver-area water ranges from soft to moderately hard, and scale is common in ice makers, dishwashers and washers. Rinse the dishwasher filter, run a cleaning cycle now and then, and change the refrigerator water filter on schedule.

  • Give the washer room to breathe

    Leave the door or lid open after laundry so the gasket and tub can dry. Use the right detergent amount, since too much often causes suds problems and leftover residue.

  • Keep cooling and cooking parts in good shape

    Vacuum the refrigerator condenser coils a couple of times a year so it does not work as hard through dry summers and cold winters. If you have a gas range, make sure it is set up correctly for altitude so flames burn clean and steady.

Membership

PointLine Care Club

One service call is $85. For $99 a year, every service call is free.

  • Free service calls all year — no $85 fee
  • 1 free maintenance visit a year
  • 10% off labor on every repair

$99/ year

One household · renews yearly · cancel anytime before renewal

Property manager or landlord? See our Property Care Club →

Repair or Replace?

When an Amana Repair Makes Sense

Amana appliances are built around simple, widely used parts, so a single failed pump, element, igniter or switch is often an affordable fix that buys plenty of extra years. If the cabinet, tub and main components are in decent shape and the problem is isolated, repairing usually costs far less than buying, delivering and installing a new unit.

Replacement can be the better path when a major sealed-system part fails on an older refrigerator, when the body is rusting through, or when several problems are stacking up at once. Your technician will lay out the cost of the repair next to the age and overall condition of the appliance, and then the decision is yours with no pressure either way.

FAQ

Questions From Amana Owners

Questions Amana owners ask us.

Still have a question?

Give us a call — we'll be glad to help.

(720) 285-3573

Can PointLine work on my Amana refrigerator?

Yes, we repair Amana refrigerators along with their freezers, washers, dryers, dishwashers, ranges and microwaves. Cooling problems, ice maker trouble, leaks and noisy fans are all part of what we handle.

What do you charge to diagnose the problem?

The diagnostic visit is $85, and it is credited toward the repair if you go ahead. You get a clear explanation and a firm quote before any work begins, so there are no surprises.

Do you use OEM parts on Amana repairs?

Yes, we install genuine OEM parts. They are designed to fit and work with your appliance as intended, which helps the repair hold up.

What happens if the same problem comes back?

Your repair is covered by a 90-day parts and labor warranty. If the part we replaced fails within that window, give us a call and we will make it right.

My Amana dryer flashed F4E3, or the dishwasher shows F9E1. What now?

These codes point to a likely area rather than a final answer. On Amana dryers, F4E3 commonly means restricted airflow, so check that the vent is clear; on dishwashers, F9E1 means a long drain, often from a clogged filter or hose. If the code returns, your technician can test the parts behind it.

Is it worth fixing an older Amana?

Often it is, because many Amana repairs involve simple, reasonably priced parts. If a major component has failed or the appliance is worn throughout, we will tell you honestly that replacement may be the smarter choice.

Do you serve my part of the Denver area?

We serve 21 cities across the Denver Metro Area and Boulder County from our office in Superior. Call (720) 285-3573 and we can confirm your address and find a time that works.

Get Your Amana Working Again

Call (720) 285-3573 to schedule a visit. Same-day service is often available, the $85 diagnostic is credited toward your repair, and we accept cash, major credit cards, Venmo, Apple Pay and checks. Ask about the $99/year Care Club for free service calls, a yearly maintenance visit and 10% off labor.

PointLine Appliance Repair is an independent repair company, not affiliated with Amana.

Call Now Book Online